HID reports are typically prepended with the Report ID--in HIDLibrary, use the HidReport.ReportID I've got my custom HID device detected by Windows 7 with this (built by guess and stealing from...

Step by step guide to do a custom USB HID device on STM32 using ST CubeMX. There is already one page addressing it but without any details for beginners.

Custom USB HID example using Makefile for STM32F103xB. This is a custom HID example for STM32F103xB, using Makefiles, basic skeleton generated by STM32CubeMX.

With custom HID devices the operating system doesn't know what their function is, but it does For your computer they are different devices/interfaces and can act independently, but they are...

There is a post (STM32 And Custom USB HID Device? Default USB HID device with STM32CubeMx. Intialise all peripheral: USB, HSE, SWD, button (to send USB reports), leds (just for...

A custom HID device doesn't conform to any of the known standard HID device reports. As soon as you pull DP high to signal device insertion then it will start raining requests from a very impatient host.

iddev0,hidraw2: USB HID v1.11 Device [STMicroelectronics STM32 Custom Human interface] on usb-0000:00:1d.-1.7/input0. Запускаем команду.

* This device IS a FS device, so DEVICE_FS should be 1 above, but it I also noticed that InEvent is missing in the interface, so USBD_CUSTOM_HID_DataOut() just returns without doing anything.

#define HID_DESCRIPTOR_TYPE 0x21 #define HID_REPORT_DESC 0x22. #define HID_REQ_SET_PROTOCOL 0x0B #define HID_REQ_GET_PROTOCOL 0x03 #define HID_REQ_SET_IDLE 0x0A #define HID_REQ_GET_IDLE 0x02...

When using Harmony 1.08.01 to generate for code for a custom USB HID device, the following report descriptor is placed in system_init.c : const uint8_t hid_rpt0[] = { 0x06, 0x00, 0xFF...